How To Remove Quick Shine Floor Finish. Apply a small amount of the ift solution to a section of the floor. Anytime you accidentally get any drops of our floor finish or hardwood floor luster on your table or counter, even after it's dried, you can use windex or formula 409 to remove it.
Use a water droplet to remove the quick shine floor finish from the surface. Quick shine deep cleaner is available at www. Apply a small amount of the ift solution to a section of the floor.
Table of Contents
Spread Evenly With A Freshly Rinsed Sponge Mop.
Spray it on the area, let it sit for a minute or so then wipe it up with a damp cloth or sponge. Apply only enough cleaner to wet the floor, and if you want to vacuum instead, getting a review of shop vacs is great to find the best option for you. Wring the towel out to just damp.
If You Have A Floor That.
You need to use the cleaner in hot water and apply this to your floors. Use a plunger to suction onto the top of the quick shine and pull until all the product is removed. How to use quick shine finish, maintain your shine and.
Allow The Deep Cleaner Solution To Remain On The Floor For A Few Minutes.
After floor is completely dried, additional coats can be applied if a higher gloss is desired. Like hardwood floors, the best way to remove quick shine® from laminate surfaces is to use the right cleaning product. For a more thorough clean use quick shine floor cleaners.
Quick Shine® Deep Cleaner Is Made Specifically For Removing Quick Shine® From All Hard Floors.
For light cleaning of grime or dirt use a sponge mop or microfiber mop dampened with plain, cool tap water. The product removes the finish from hardwood floors, without harming their polyurethane seal. I used the finish on laminate floors and was initially pleased with the shine it left.
If There Is No Shine After Drying, You’re Done!
Use safety glasses and gloves. Removing wax finish from hardwood floors. It should sit on the floors for several hours to work correctly.