How To Disconnect Smoke Alarm From Mains. Press and hold the test button for at least 15 seconds. Remove the cord connecting the unit to the house and, if necessary, remove any backup batteries.
With the battery removed, press and hold the test button for 15 to 20 seconds. If you're not sure how to remove a particular model, check the user manual. Turn off the power to the smoke alarm at the circuit breaker.
Table of Contents
It Looks Like I Might Need To Remove The Electrical Wires From The Unit (After Switching Off The Mains Connection To The Unit), In Order To Be Able To Open Up The 9V Battery Compartment, But The Manual Doesn't Say Anything About This, So I'm Concerned It's Not Safe To Do, And Don't Know How To Do It.
Disconnect your smoke alarm from its wiring harness. Reconnect the power and reinstall the battery. All smoke detectors have a “test” button, sometimes it is the only button on the face of the detector.
The Detector Will Become Loose, And You Need To Pull It Down The Ceiling.
Take your smoke alarm down if the alarm noise doesn’t stop. Press this, and the beeping will stop. Switch on the mains electricity supply.
How Do I Turn My Fire Alarm Off?
Unplug the detector from the socket. With the battery removed, press and hold the test button for 15 to 20 seconds. Provide a heat detector to the kitchen if it's open plan to the escape route.
Connect Your New Wiring Harness.
With the battery removed, press and hold the test button for 15 to 20 seconds. Remove the smoke alarm from the mounting bracket and disconnect the power. If you have other working smoke alarms in the house, they may all beep.
Removing The Battery And Putting It Back When You Are Finished Cooking Is One Answer To The Problem.
To restore the power, you have to trip back the circuit breaker or plug back the fuse. Continue reading to learn how to remove the smoke detector and unplug your hardwired smoke detector. As a result, the alarm will stop beeping.