How To Change Code On Electronic Door Lock. 2 and its component layout in fig. Set it carefully aside and look at every hole in the door lock.
Hold down the c button from the front of the faceplate the entire time you are changing the code on your keyless door lock. Enter a four to eight digit security code on the outside electronic lock keypad and press the “lock” button again. Enter a new programming code (6 digits), then wait for the schlage button to light orange three times and the lock beep three times.
Table of Contents
Enter A Four To Eight Digit Security Code On The Outside Electronic Lock Keypad And Press The “Lock” Button Again.
Repeat the process to add more user codes—if you want to. You should see the schlage button turn green, giving one long flash and one long beep. Set it carefully aside and look at every hole in the door lock.
The First Step Would Be Reprogramming The Code For The Lock.
Press the schlage button and the number 1 button at the same time. Press 2, 0, and then press the lock button. Press key 1 and then press the unlock button.
Enter A User Id (2 Digits — 01 To 50) And Press The Unlock Button.
How to program a schlage electronic door lock? How to change code on keypad door lock? Wake up the keypad by touching it using the palm of your hand.
Then Press The Number 1, Followed By The Hash Key.
Pushing the shlage button and the 1 key primes the lock to accept a new entry code. Repeat the detailed steps above to create security codes for other users. The first user will have a regular security code programmed with this step.
Enter Your Current Programming Code And Press The Unlock Button.
Turn the keypad faceplate, so it faces downward. There is a “program” keypad button on the door’s interior side. Learning how to change the code on.